To use Hotspot Shields Windows VPN,follow these steps:

1. Download and Install: Click the download link on the Hotspot Shield website to install the Windows version.

2. Access Settings: Open the installed VPN application and click "Start" to access the menu, then select "Security."

3. Choose Network Settings: In the "Security" tab, click "Change" to enter the network settings.

4. Set DHCP Server: Under "Network," select " DHCP Server" and enter your chosen IP address and prefix. If you're using a DHCP server, select it from the dropdown menu.

5. Test Connection: Click "Test Connection" to verify the DHCP server is operational and that your device is connected.

6. Configure DHCP Alias (Optional): If needed, go back to the DHCP settings and add an alias for easier management.

7. Set Target IP and alias (Optional): Under "Security," set the target IP and alias if you want traffic redirected to your device.

8. Network Configuration: Navigate to the "Network" tab and configure your local IP address and network settings.

9. Use VPN: Once configured, log in to your profile and use the VPN for browsing, shopping, etc.

Troubleshooting Tips:

• If the DHCP server isn't working, check your router settings or contact support.
• If the connection doesn't work, verify your router settings and ensure the DHCP server is active.

By following these steps, you should be able to set up and use Hotspot Shield's Windows VPN effectively.